Basic Primary framing connectors are standard recessed tension/quick-connector plugs, 4 per frame member. Bolt placement is usually on the profile side slots. Duel tension plugs used for end-to-end connection, 4 or more per frame member. Accessory/utility attachment by standard T-nut/block. Reinforcement of connections for special needs can employ any of the following;

Additional tension plugs in available slots.

Concealed retrofit inside angles and consoles in 50mm and 100mm widths.

Exposed retrofit inside angles and consoles in 100mm, 150mm, and 200mm widths.

Concealed brace beams using 50mm 1x1 and 1x2.

Exposed brace beams using 50mm 1x2, 1x3, and 1x4.

Tension cable braces using 50mm and 100mm consoles with drilled eyelets for mounting of toggle-jaw turnbuckle and swage or toggle-jaw swage.

Exposed retrofit gusset plates, as per joint configuration.

Community content is available under CC-BY-SA unless otherwise noted.